ÖLFLEX® TRAIN HT 150 FF 3,6kV

Single-core cable according to EN 50382-2 type FF for high requirements in railway applications

ÖLFLEX® TRAIN HT 150 FF 3,6kV - Single-core cable EN 50382-2 type FF, 3,6/6kV, 150°C, for use in railways/rolling stock; EN 45545: HL1-HL3

  • Meets EN 50382-2 type FF and
    EN 45545-2
  • High temperature resistance: -40°C up to +150°C
  • Highly oil- and fuel-resistant

RailGood chemical resistanceFlame-retardantHalogen-freeCold-resistantMechanical resistanceOil-resistantTemperature-resistantUV-resistant

Article number Number of cores and mm² per conductorOuter diameter [mm]Copper index (kg/km)Weight (kg/km)
15382060
1 X 2.510.824122
15382061
1 X 4.011.338.4143
15382062
1 X 6.011.957.6167
15382063
1 X 10.012.896217
15382064
1 X 16.013.9153.6291
15382065
1 X 25.016.0240403
15382066
1 X 35.017.3336503
15382067
1 X 50.019.0480668
15382068
1 X 70.020.8672867
15382069
1 X 95.022.69121110
15382070
1 X 120.024.311521343
15382071
1 X 150.026.214401621
15382072
1 X 185.028.717762004
15382073
1 X 240.031.923042555

Benefits

  • Good flexibility - easy installation with tight space requirements
  • Good chemical resistance please see Appendix T1
  • For high ambient temperatures
  • Reduced flame spreading increases the protection against damage to persons and property in the event of a fire

Application range

  • For use in railway vehicles, for fixed installations and applications where limited movement may occur
  • Suitable for wiring of control cabinets, distributors, converters, motors and batteries
  • Also applicable within oily environments and areas with increased ambient temperature

Product features

  • Fire behaviour according to EN/IEC:
    - Halogen-free acc. to EN 60754-1
    - No corrosive gases acc. to EN 60754-2
    - No fluorine acc. to EN 60684-2
    - No toxic gases acc. to EN 50305
    - Low smoke density acc. to EN 61034-2
    - Flame-retardant acc. to EN 60332-1-2
    - No flame propagation acc. to
    EN 60332-3-24 / EN 60332-3-25 /
    EN 50305
  • Chemical properties:
    - Oil resistant acc. to EN 50382-2
    - Acid resistant acc. to EN 50382-2
    - Alkali resistant acc. to EN 50382-2
    - Ozone resistant acc. to EN 50382-2
  • Current rating according to EN 50355, appendix A

Norm references / Approvals

  • EN 50382-2 type FF
  • EN 45545-2 HL1, HL2, HL3

Product Make-up

  • Tinned-copper strand, fine-wire
  • Insulation: Silicone rubber compound, type EI 111
  • Wrapping: Halogen-free plastic foil (optional)
  • Outer sheath: Silicone rubber compound, type EM 107
  • Outer sheath colour: Black

Classification ETIM 5

  • ETIM 5.0 Class-ID: EC000057
  • ETIM 5.0 Class-Description: Low voltage power cable

Conductor stranding

  • Fine wire according to VDE 0295 Class 5/ IEC 60228 Class 5

Minimum bending radius

  • Fixed installation: 3 x outer diameter
  • Occasional flexing:
    5 x outer diameter

Nominal voltage

  • U0/U AC 3,6/6 kV
  • Um AC 7,2 kV
    V0 DC 5,4 kV

Test voltage

  • 11 kV AC; 26 kV DC

Temperature range

  • -40 °C to +150 °C

  • Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request.
  • Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related surcharges.
  • Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
  • Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).
  • Photographs and graphics are not to scale and do not represent detailed images of the respective products.