UNITRONIC® 100 CY

Screened control and signal cable with small cross-sections

UNITRONIC® 100 CY: Low-frequency PVC data cable, LAPP UNITRONIC® core identification code, Screened, Grey, Flame retardant, For various applications

Article number Number of cores and mm² per conductor Outer diameter (mm) Copper index (kg/km) Weight (kg/km)
UNITRONIC® 100 CY
0034006
2 x 0.14 3.7 12 20
0034007
3 x 0.14 3.9 13 28
0034008
4 x 0.14 4.1 14.3 33
0034009
5 x 0.14 4.4 15.5 38
0034010
7 x 0.14 4.7 20.3 49
0034011
10 x 0.14 5.7 34.3 66
0034012
14 x 0.14 6.3 32 80
0034013
16 x 0.14 6.6 40.9 90
0034016
27 x 0.14 8.1 70.6 148
0031031
3 x 0.25 5.4 20.2 48
0031066
4 x 0.25 5.7 24 61
0031067
5 x 0.25 6.3 29 72
0031032
7 x 0.25 6.7 37.6 82
0031033
10 x 0.25 8.2 48.8 129
0031034
14 x 0.25 8.7 64.6 147
0031068
2 x 0.34 5.6 20 45
0031048
3 x 0.34 5.8 24.1 62
0031069
4 x 0.34 6.4 29 65
0031070
5 x 0.34 6.9 42 95
0031049
7 x 0.34 7.3 50 106
0031050
10 x 0.34 9 67.7 167
0031052
16 x 0.34 10.5 95 219

Application range

  • These control and signal cables are used in the milliampere range for computer systems, electronic control equipment, office machines, balances etc. and wherever the thinnest possible control cables are required.

Product features

  • Robust, flexible and resistant outer sheath
  • Small outer diameter despite high number of cores
  • Cable similar to UNITRONIC® 100, but with copper braiding
  • Flame-retardant according IEC 60332-1-2
  • 3 cores with earth wire (green-yellow)
    2 cores (black/blue)

Norm references / Approvals

  • Based on: VDE 0814 or VDE 0812

Product Make-up

  • Fine-wire/multi-wire (0.34 mm²) strand made of bare copper wires
  • Core insulation made of PVC
  • Inner sheath made of PVC
  • For the cross section of 0.14 mm², a polyester tape is used underneath the screen braiding instead of the inner sheath.
  • Tinned-copper braiding
  • Outer sheath made of PVC
    Outer sheath colour: grey (RAL 7001)

Classification

  • ETIM 5.0 Class-ID: EC000104
  • ETIM 5.0 Class-Description: Control cable

Core identification code

  • Refer to Appendix T7 for the
    UNITRONIC® colour codes

Mutual capacitance

  • Approx. 120 nF/km

Peak operating voltage

  • (not for power applications)
    500 V

Inductivity

  • approx. 0.7 mH/km

Conductor stranding

  • Stranded, fine-wire
    0.34 mm²: 7-wire

Minimum bending radius

  • Occasional flexing: 20 x outer diameter
  • Fixed installation: 6 x outer diameter

Test voltage

  • Core/core: 1500 V rms
  • Core/screen: 1500 V

Protective conductor

  • Green-yellow

Temperature range

  • Occasional flexing: -5°C to +70°C
  • Fixed installation: -40°C to +80°C

Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request.
Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related surcharges.
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).
Photographs are not to scale and do not represent detailed images of the respective products.