ÖLFLEX® HEAT 260 MC

Polytetrafluoroethylene cables for most extreme loads

ÖLFLEX® HEAT 260 MC - PTFE power cable, robust, chemical resistant and space-saving, for use in machine and plant construction at temperatures: -190°C to +260°C

  • Excellent chemical, thermal and
    electrical performance
  • Thin, light and robust

Suitable for outdoor useGood chemical resistanceFlame-retardantCold-resistantLow weightOil-resistantAcid-resistantTemperature-resistantUV-resistant

CEEACFire

Article number Number of cores and mm² per conductorOuter diameter [mm]Copper index (kg/km)Weight (kg/km)
ÖLFLEX® HEAT 260 MC
0091300
2 X 0.53.99.622
0091301
3 G 0.54.114.433
0091302
4 G 0.54.519.245
0091305
2 X 0.754.214.432
0091306
3 G 0.754.421.647
0091307
4 G 0.755.128.858
0091310
2 X 1.04.819.242
0091311
3 G 1.05.128.856
0091312
4 G 1.05.838.471
0091315
3 G 1.55.643.272
0091316
4 G 1.56.157.698
0091317
5 G 1.5772118
0091320
3 G 2.57.17287
0091321
4 G 2.57.796116
0091322
5 G 2.58.5120145

Benefits

  • Space-saving installation due to small cable diameters
  • Stress crack resistant to frequent ambient temperature fluctuations
  • Due to good electrical and mechanical properties suitable for sensor technology
  • Low outgassing behaviour

Application range

  • For use in environments with very high operating temperatures, heavy usage of chemical agents or confined spaces
  • ÖLFLEX® HEAT 260 has proven to be an effective solution in harsh environments such as paint shop lines
  • Typical fields of application
    - Industrial furnace construction
    - Foundries
    - Chemical industry
    - Power plant engineering
    - Paint shop line technology
    - Heating elements
    - Polymer processing
    - Wind turbine engineering
  • Sensor systems, e.g. level sensors

Product features

  • ÖLFLEX® HEAT 260 made of PTFE
    - Outstanding resistance against acids,
    alkalis, solvents, lacquers, petrol, oils and
    many other chemical media
    - Difficult to inflame
    - High dielectric strength and high abrasion
    resistance
    - Low water absorption
    - Resistant to microbes
    - Adhesion-free insulation materials
    - Weather and ozone resistant
    - Hydrophobic and dirt-repellent
    - High elongation and tear resistance
    - Resists contact with liquid nitrogen
    - Resistant against hydraulic fluids
  • Flame-retardant

Product Make-up

  • Fine-wire strand made of nickel-plated copper
  • PTFE-based core insulation
  • Cores twisted together
  • PTFE-based outer sheath, black

Classification ETIM 5

  • ETIM 5.0 Class-ID: EC001578
  • ETIM 5.0 Class-Description: Flexible cable

Classification ETIM 6

  • ETIM 6.0 Class-ID: EC001578
  • ETIM 6.0 Class-Description: Flexible cable

Core identification code

  • Colours according to VDE 0293-308, refer to Appendix T9

Conductor stranding

  • Fine wire according to VDE 0295 Class 5/ IEC 60228 Class 5

Minimum bending radius

  • Occasional flexing: 15 x outer diameter
  • Fixed installation: 4 x outer diameter

Nominal voltage

  • U0/U: 300/500 V

Test voltage

  • 2500 V

Protective conductor

  • G = with GN-YE protective conductor
  • X = without protective conductor

Temperature range

  • Fixed installation:
    -190°C to +260°C
    Short-term: up to +300°C

  • Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request.
  • Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related surcharges.
  • Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
  • Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
  • Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).
  • Photographs and graphics are not to scale and do not represent detailed images of the respective products.