UNITRONIC® BUS PB HEAT 180
PROFIBUS cable with an extended temperature range up to +180°C
Bus cable for PROFIBUS-DP, -FMS and FIP. No need for additional cable protection against high temperatures. Oil resistance. Temp. range from -50 bis +180°C
Benefits
- no need for additional cable protection against high temperatures
- High temperature resistance
Application range
- Fixed Installation
- For use in high temperature areas with up to 180 °C
Product features
- High oil-resistance
Product Make-up
- Solid and bare copper conductor
- Wire insulation Fluorethylen
- Overall screening with copper braid and plastic-laminated aluminium foil
- Outer sheath: FEP, violet (RAL 4001)
Classification ETIM 5
- ETIM 5.0 Class-ID: EC000830
- ETIM 5.0 Class-Description: Data cable
Classification ETIM 6
- ETIM 6.0 Class-ID: EC000830
- ETIM 6.0 Class-Description: Data cable
Mutual capacitance
- approx. 28 nF / km
Peak operating voltage
- (not for power applications) 250 V
Minimum bending radius
- Repeated: 7 x Outer Diameter
Single: 5 x Outer Diameter
Test voltage
- 3600 V DC (3 sec.)
Characteristic impedance
- (3 - 20 MHz): 150 ± 15 Ohm
Temperature range
- -50 to +180°C
- Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request.
- Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
- Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
- SIMATIC® is a registered trademark of SIEMENS AG. FIP is a registered trademark of World FIP
- Lapp Kabel is a member of the PROFIBUS user organisation (PNO)
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.